DSC00531 – Enhanced – NR
| Customization: | Available |
|---|---|
| Transport Package: | Cartons Pallets Wooden Case |
| Specification: | IEC IEEE |
Oval Eye Nut and Bolt Eye Long are drop forged steel material
Anchor and Chain Shackles are Drop forged steel and
| Nut conventional eye bolt 5/8 “ | |
| Steel | |
| It must be built in one piece | |
| Must be galvanized in hot dip, presenting a smooth surface, free of defects | |
| ASTM A-153 | |
| ISO-9001 or recent | |
| pulg(mm) | 5/8(15.87) |
| pulg(mm) | 1 3/8(34.92) |
| pulg(mm) | ½(12.7) |
| pulg(mm) | 1-1/2(38.1) |
| pulg(mm) | 1 – 3/4(9.45) |
| pulg(mm) | 2- 1/2(63.5) |
| pulg(mm) | 3(76.2) |
| kG(lbs) | 5,670(12600) |
| lbs | 0.78 |
{“aigc_info”:{“aigc_label_type”:0,”source_info”:”dreamina”},”data”:{“os”:”web”,”product”:”dreamina”,”exportType”:”generation”,”pictureId”:”0″},”trace_info”:{“originItemId”:”7530664526233029951″}}
Tension Clamp For Aluminium Conductor
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Valoraciones
No hay valoraciones aún.